capabilities
Everything you ever wanted in a casting vendor
Castings, machined, coated, tested, assembled. All under one roof!
ISO 9001:2015 CERTIFIED
Precision Enterprises operates with ISO 9001:2015-certified quality procedures and maintains documented, auditable processes throughout its manufacturing operations
Aluminum Sand Casting
A356, 319, 356-T6, Almag 535 | 1-150 lb castings |
5 – 75 lb sweet spot |
Learn more about our Aluminum Sand Casting
CNC Machining
20+ CNC machining centers | Substantial in-house capacity |
Tight tolerance |
Learn about our CNC Machining
Engineering & Tooling
On-site engineering | SolidWorks & flow simulation|
Tooling production |
Learn about our Engineering
Production capabilities
From first samples to production| Approximately 100 to 50,000+ pieces | Learn about our Capabilities
Quality & testing
ISO 9001 | Two CMMs | Pressure Testing | Consistent, repeatable quality | Learn about our Quality Control
Finishing & secondary operation
Cosmetic preparation | Powder coating | Painting| Minor assembly | Learn about our Secondaries
Complete finished Components
Casting, machining, testing assembly, and finishing –
all under one roof |
Learn about our Finishes
Our Facility Experience
75,000-square-foot facility | 70+ years of aluminum casting and machining| Learn about our facility
High voltage power distributor module for electrical drive system for buses and coaches, takes the main power and splits it out for accessories (climate, lightning, etc.) Cast, then fully machined.
Custom cast aluminum ventilator base manufactured using aluminum casting, CNC machining, and final cosmetic powder coating for durability, including strategic masking for critical mating surfaces by Precision Enterprises.
Sales – Jeff Smith
National SAles Director
Phone: 731-642-8709
Have a part you need made?
Send us your drawing, model, or part information.
Can We Make Your Part?
Aluminum casting, machining, finishing and assembly…managed from one source.
If you’re sourcing an aluminum cast component, you shouldn’t have to coordinate a foundry, machine shop, inspection company, coating supplier and assembly operation just to get one finished part.
Precision Enterprises can manage the process from engineering and tooling through casting, machining, inspection, secondary finishing and minor assembly…delivering a finished component ready for your assembly.
With more than 70 years of aluminum casting and machining experience, in-house engineering and tooling, multiple foundries, 25+ CNC machining centers and established secondary suppliers, we can take your project from first-pass samples through ongoing production.
Have a part you need manufactured? Let’s talk about it.
Simplify the Supply Chain for Your Aluminum Castings
A cast component can pass through a surprising number of hands before it reaches your assembly line.
And between those steps, someone has to coordinate transportation, scheduling, inspection, documentation and quality control.
Precision Enterprises brings much of that process together.
Instead of managing every step separately, you can work with one manufacturing partner responsible for the finished component. That can mean fewer supplier handoffs, less transportation between processes and one team responsible for keeping the program moving.
Give us the part. We’ll manage the process.
From Your CAD File to a Finished Component
We can work from a blueprint, CAD file, sample or existing casting.
Our in-house engineering team reviews the part for manufacturability and fit and function, then works with you to determine the appropriate casting method, alloy, tooling, machining requirements and other production considerations.
Depending on the project, our engineering team can:
Tooling production is also handled on site.
Our goal at Precision Enterprises is to go beyond just producing a casting that comes out of the mold. We’ve developed a turnkey manufacturing process that produces the finished component your application requires.
Aluminum Sand Casting
Complex aluminum castings from prototype quantities through production.
Precision specializes in aluminum sand casting for components ranging from under 1 pound to approximately 150 pounds, with a typical sweet spot of 5–75 pounds.
We pour a range of aluminum alloys, including:
Foundry Equipment
Our foundry capabilities include multiple molding processes and equipment, allowing us to match the process to the size, complexity and production requirements of your part.
Our equipment includes:
- Sinto automatic molding
- Cope and drag molding
- Roto-Lift molding
- Air set / no-bake molding
- Floor molding
- Green sand molding
- Rollover and jolt-squeeze molding
- Permanent mold capabilities
- On-site core room for complex core assemblies
lARGE COMPLEX CASTINGS
For larger and more complex castings, our engineering team uses CAD and flow-analysis software to evaluate the casting before production. The result is a casting designed with the downstream manufacturing process in mind, not a casting that has to be figured out after the fact.
CNC Machining
The casting is only part of the finished component.
Precision has 25+ CNC machining centers and machines approximately 95% of the castings poured in our foundries.
Our machining capabilities include:
Because our engineering, foundry and machining operations work together, machining requirements can be considered while the casting and tooling are being developed.
That matters when your finished component depends on precise interfaces, critical dimensions, machined surfaces or multiple machining operations.
We can also machine materials beyond castings, including aluminum billet, bar and plate, stainless steel, titanium and specialty alloys, plastics and engineered polymers.
Quality & Inspection
The finished component needs to meet the requirements—not just the casting.
Precision Enterprises operates with ISO 9001:2015-certified quality procedures and maintains documented, auditable processes throughout its manufacturing operations.
Quality and inspection capabilities include:
Parts that leave Precision for outside secondary finishing are brought back through inspection to verify that they return on time and to print. That gives your team one less point of responsibility for the finished component, rather than having to manage quality across multiple suppliers.
Finishing, Testing & Assembly
Need more than a machined casting?
Precision can manage the secondary operations required to turn a machined casting into a finished component.
Available services include:
Minor assembly can include installing hardware, printed circuit boards and other components into the finished casting. For some programs, Precision can also handle kitting and packaging so finished products can be shipped directly to your distribution network or retail locations.
Your Parts From First Samples to Production
Not every aluminum casting project needs the same production strategy.
Precision can support programs ranging from approximately 100 pieces to 50,000+ pieces, depending on the part and manufacturing requirements.
We can support:
First-pass samples → prototype quantities → production → ongoing programs
For recurring production, Precision can also work with blanket orders and ongoing inventory programs such as Vendor Managed Inventory.
Whether you need a relatively small production run or an established component manufactured on an ongoing basis, the process can be managed through the same manufacturing partner.
One Source for the Manufacturing Process
The advantage of Precision isn’t simply the number of machines or processes we have.
It’s the ability to connect those processes.
Engineering
On-site engineering, CAD, SolidWorks and flow simulation.
Tooling
Tooling and pattern development produced in-house.
Casting
Multiple aluminum sand casting processes and production capabilities.
Machining
25+ CNC machining centers with experience machining complex aluminum castings.
Inspection
Documented quality procedures, dimensional inspection, CMM, pressure testing and first-article processes.
Finishing
Powder coating, painting, anodizing, E-coat and other secondary operations.
Assembly
Minor assembly, kitting and customer-specific packaging.
One project. One manufacturing partner. One finished component.
Industries wE sERVE
Built for Complex Aluminum Components
Precision supports manufacturers across industries including:
The specific requirements vary by application, but the manufacturing question is often the same:
Can you make the part, and can you manage the process required to get it ready for our assembly line?
That’s where Precision’s combination of engineering, aluminum casting, machining, inspection and secondary operations comes together.
Why Choose Precision Enterprises
Take advantage of our 70 years of experience in casting and machining technology. Let us review your project and have our in-house engineering staff provide cost savings ideas; tooling, materials, alloys, tolerances, finishes…and more.
Save on Tariffs!
No need to worry about reshoring costs with Precision Enterprises. We’re located in the United States . Save on tariffs with us.
Family-Owned
Precision Enterprises has been in business and family-owned since 1945, and have satisfied customers worldwide with unparalleled service and expertise.
In-House Engineering
Whether you supply us a blue print, a sample, or your own cad file, our on-site engineers focus on the fit and function of your final product.
One-Stop Shop
With 25+ CNC machines, multiple furnaces, and foundries, quality control, secondaries, and engineers all under one roof – there’s no need to go anywhere else!
Client Testimonials
Dont’t take our word for it – here’s what our clients say:
We have had a wonderful partnership with the excellent people at Precision Enterprises for the past 15 years. A great team to work with and we have partnered on many projects. We look forward to the future and partnership on new business.
rICHARD l.
We have been a supplier to Precision Enterprises for over 25 Years. The managers we have worked with have always been very professional, we have had a great business relationship with all the people we have worked with over the years. They are an exceptional company to work with and I would highly recommend them and their services.
Wayne e.
I have been genuinely impressed with the team at Precision Enterprises and their extensive expertise in the casting and machining industry. From casting simulation and design support to delivering finished machined and painted products, they have truly been our partner for many years.
Nate C.
70+ Years of Aluminum Casting & Machining Experience
Precision Enterprises has been family-owned for three generations, with more than seven decades of experience in casting and machining.
Today, that experience is combined with modern engineering software, automated molding equipment, CNC machining technology and documented quality systems.
The result is a manufacturing partner equipped to take a project from drawing board to first-pass sample to production quantities and finished components.
